Diagram

Answered

图形识别转换中,手动停止转换时的释放耗时很久

1.使用myscript引擎,转图形Diagram功能,手写很复杂情况报点比较多时使用转换过程中,中途退出时,退出释放过程时间需要很长,导致下一次进行识别时因为上一次的释放还没完成,后台就一直卡着,麻烦帮忙看下释放耗时为什么这么长,或者有没有比较好的退出释放方式



Best Answer

Dear Customer,


Thnak you for the video.


After reviewing it, I have several remarks:

-It seems you are inputting many "random" strokes in Diagram mode. From this, our technology will face difficulties extracting "Text" from "non text". As it is very demanding, you shall not enter so many strokes.

-Also, reviewing the first 2 conversions, they take significant time. This seems to indicate you have a "low CPU". Indeed, the more powerful the CPU, the faster the recognition will be.


On our side, we have the following recommendations:

-First, you shall not allow to enter so much strokes. if you have too many strokes, or too long strokes, you shall then reject these.

-If possible, review your hardware to have a more powerful CPU


The important is to keep in mind our tehcnology is very demanding, so ensure you have a powerful CPU and do not enter too many strokes.


Best regards,


Olivier


Answer

Dear Customer,


Thnak you for the video.


After reviewing it, I have several remarks:

-It seems you are inputting many "random" strokes in Diagram mode. From this, our technology will face difficulties extracting "Text" from "non text". As it is very demanding, you shall not enter so many strokes.

-Also, reviewing the first 2 conversions, they take significant time. This seems to indicate you have a "low CPU". Indeed, the more powerful the CPU, the faster the recognition will be.


On our side, we have the following recommendations:

-First, you shall not allow to enter so much strokes. if you have too many strokes, or too long strokes, you shall then reject these.

-If possible, review your hardware to have a more powerful CPU


The important is to keep in mind our tehcnology is very demanding, so ensure you have a powerful CPU and do not enter too many strokes.


Best regards,


Olivier

Dear Customer,


please find the Bing translation of your above message:

1. Use myscript engine, turn graphics Diagram function, handwriting is very complex situation more use conversion process, exit, exit release process time is very long, resulting in the next identification because the last release has not been completed, the background has been stuck, Trouble to see why the release takes so long, or if there is a good way to exit release

If I understand well:

-you have a Diagram part with many strokes

-you start the recogntion of your Diagram

-As the conversion takes time, you want to cancel the recognition

-You start again a new conversion immediately


=> Let me know if the above is not correct.


First, what has to be kept in mind is that our recognition technology is a demanding process, the more ink you provide, the longer the recognition process will take.

Then, there is no way to "cancel" the recognition, the only way consists in killing the recogntion process.

We are therefore not surprised that if requesting a new recognition, as the previous one has not been canceled your application stucks.


From this, you understand our technology is designed "as-is", there is no way to cancel the recognition except killing the recogntion process.


Best regards,


Olivier